MAX Trailer MAX710
Die Farbe des Fahrzeugs auf dem Foto kann abweichen.
- Chassis number 110240
- Reference MAX710-Z-8(3+5)-V-30-ATX-A-7.15-(330)-19.5-1.36-2.85-PA
- Number of axles 8
- Condition New
- Year of manufacture 2025
- Colour RAL 9006 (Brillant Direct) - White aluminium (brillant direct)
- Availability Directly available
- Steering Type Hydraulic
Die wichtigsten Unterlagen
Detailinformationen
Technical data
Weights
| Technical value 80 km/h | |
|---|---|
| King pin load | 37000 kg |
| Gross weight | 148200 kg |
| Tare weight +- 3% | 35285 kg |
| Payload | 112915 kg |
| Axle load front bogie | 41700 kg |
| Axle load rear bogie | 69500 kg |
Dimensions
| Fifth wheel height loaded | 1300->1400 mm |
| Loading platform length | 7 150 mm |
| Extendable by | 4400 |
| Bogie width | 2 850 mm |
| Wheelbase | 1 360 mm |
| Turning circle reversing | 2 700 mm |
| Bogie length | 6840 |
Gooseneck
1 x Gooseneck
Gooseneck hydraulic lift- and lowerable and detachable.
Length ± 3 650 mm.
2 pairs of lashing rings foldable outwards (LC 5000 daN)
2 pairs of lashing rings on the gooseneck (LC 10 600daN)
1 pair of lashing rings on the centre section of the gooseneck (LC 10 600 daN)
For use of trucks: 6 x 4 and 8 x 4
- Load manometers at the gooseneck for the axle load on the front and the rear bogie incl. axle load graph.
- One powder fire extinguisher (6 kg) with a protective casing and holder (± 15kg).
-
Electro-hydraulic unit ± 4 kW integrated in the gooseneck.
The unit is not suitable for continuous operation under full load and can only be used in conjunction with a permanently installed diesel power pack with integrated oil tank or with a separate oil tank. - Spiral cable for the the electric-hydraulic pump and/or electric winch (35 mm², 3.5 m length, max. 160 A) between the semi-trailer and the truck with socket (ANDERSON-ANDERSON).
- 3. lifting and lowering cylinder on the gooseneck to increase the active king pin load (max 38.4 T@ 62 km/h).
Powerpack-HA-1-EU-Std.
1 x Powerpack-HA-1-EU-Std.
1- cylinder Hatz-Diesel engine (silent pack) with electric starter and battery.
Performance: 9.5 kW (12.9 HP) at 3000 rpm
Exhaust classification: EU Stage V
Maximum hydraulic pressure: 280 bar
Maximum flow rate: 21l/min
Mounting on the gooseneck.
Hydraulic oil tank: 100 L
Frame hot-dip galvanized.
(± 480 kg)
Front Bogie
1 x 3-axles compact front bogie
Front and rear hook receiver.
Length: 3 560 mm
Chassis width: 2 850 mm
1 pair of lashing rings at the front (LC 10 600 daN).
1 pair of lashing rings at the rear, on the hook mount (LC 16 000 daN).
- On the front bogie, air connections for air pistol and air screw driver.
-
BEKA-MAX central lubrication for a 3 axle bogie with NLGI-2 normal grease.
(not connected to the steering rods). - A 7-pole socket left and right at the rear of the front bogie for the warning boards.
- 1 LED working lamp left and right at the rear on the front bogie with separate on/off switch.
- Surface of the front axle bogie painted with sand as anti-slip-coating.
-
Quick-release hydraulic couplings on the front bogie.
Without warranty on the seals. (± 4 kg)
Loading deck
Loading platform
1 x Lowbed
Lowbed with telescopic outer-beam in super-low design ATX-A with hook system in front and at rear with compression-joint and between the beams ± 50 mm hardwood cover.
Basic width: 2 850 mm
Length: 7 150 mm
Beam height: 330 mm
Beam width: 650 mm
Loading height 480 mm at 150 mm ground clearance.
1 pair of lashing rings lying on the front cross connection (LC 16 000 daN).
6 pairs of lashing rings foldable outwards (LC 10 000 daN).
1 pair of lashing rings lying on the rear cross-connection (LC 16 000 daN).
5 pairs of threat blocks M30 on the inner beam for mounting screwable rings.
- 2 wooden blocks 500 x 250 x 200 mm.
-
Preparation for the attachment of screwable container fittings for 1 x 20' or 1 x 30' container on the outer beams.
Without container fittings. - On the outside of the outer beams of the loading area, preparation for foldable outriggers.
- 1 pair of loose HeProLen drive-on wedges with cross-ribs 900 x 450 x 50/300 mm. (± 100 kg)
- 5 thread blocks M30 between the lashings rings under the upper flange on the outer beam for the fitting of screwable lashings rings (LC 12 000 daN).
- 2 pairs of screwable lashing rings M30 (LC 12 000 daN).
-
Foldable outriggers, 230 mm per side.
(Without timber) - Rimmed timber integrated in steel, loose. (± 350 kg)
- On the outerbeams painting with sand as anti-slip-coating.
- Delivery from a trailer to factory Lentzweiler.
Rear Bogie
1 x 5-axles rear bogie
Mechanical pin and lug coupling for mounting a lowbed at the front, end cross member at the rear
Bogie width: 2 850 mm
Bogie length: 6 840 mm
2 pairs of retractable lashing rings (LC 10 000 daN).
1 pair of retractable lashing rings (LC 5 000 daN).
3 pairs of cutouts in the border frame for hooking in tension belts (LC 2 000 daN)
3 pairs of lying lashing rings in the chassis (LC 10 600 daN).
- A 7-pole socket on the left and right, front and rear on the rear bogie for the warning boards.
-
BEKA-MAX central lubrication for a 5 axle bogie with NLGI-2 normal grease.
(not connected to the steering rods). - Socket for the cable remote control for the auxiliary steering on the rear bogie.
- Bogie with recess.
- 2 LED- reversing lights at the rear.
- Reflectors (red - yellow) according to the EU regulation at the rear of the trailer.
- A mud flap (www.MAX Trailer.eu) at the rear of the trailer.
- A LED flashing beacon with holder on the left and right side.
- U-beam between lowbed and rear axle bogie for ramps.
- Surface of the rear axle bogie painted with sand as anti-slip-coating.
- Recess on the rear axle bogie closed in front and rear with a screwed plate.
- Speed sticker 60 & 80 km/h at the rear.
- A reversible reflector with ‘CONVOI EXCEPTIONNEL, at the rear of the vehicle.
Accessories
1 x Accessories
- Yellow reflective tape according to the EU regulation over the entire length, on the extension and at the rear.
Request a vehicle
We would be pleased if you send us an inquiry about your request. Arrange ellipse bold share group. Draft ellipse ipsum layer rotate.
- Chassis number 110240
- Reference MAX710-Z-8(3+5)-V-30-ATX-A-7.15-(330)-19.5-1.36-2.85-PA
- Number of axles 8
- Condition New
- Year of manufacture 2025
- Colour RAL 9006 (Brillant Direct) - White aluminium (brillant direct)
- Availability Directly available
- Preis Auf Anfrage
-
Location
SpecialTrailers24
Z.A.E.R. Op der Sang,
16, Op der Bréimicht
9779 Lentzweiler
Luxembourg - AdId 000187
- Steering Type Hydraulic
Would recommend for sure
